GC: You will have before you the body and enquiring mind
of [
1497], Union League Club, 38 East 37th St., N.Y.C.
Referring to information from the Forces given to this entity
on February 27th regarding the static eliminator tube and
circuit, you will answer further questions he has submitted,
as I ask them:
EC: Yes, we have the enquiring mind, [
1497], and the
information which has been given respecting static
eliminator.
Ready for questions.
(Q) Are these balls or knobs to be spherical in shape?
(A) Correct.
(Q) Are they hollow with a thin shall of copper or brass, or
are they to be solid?
(A) Solid.
(Q) Of what diameter in inches?
(A) About half to three-quarters.
(Q) Are they to be connected METALLICALLY with the WIRE of
the coils, or placed within the field of magnetic influence
of same?
(A) To be placed within the field of the magnetic influence
of same.
(Q) If connected metallically, should they be in SERIES,
relationship, or connected ACROSS the coils?
(A) Only across the coils.
(Q) Should TWO BALLS for each coil with a small space
between, each ball connected to a terminal of the coil, be
the proper arrangement?
(A) One ball for each coil.
(Q) Should these balls be used on the "bucking" or "static
cancelling" coils?
(A) On the static cancelling.
(Q) Should they be used on the main signalling or broadcast
coupling coils as well?
(A) The main signalling alone should be sufficient.
(Q) If used across the main signalling or broadcast coupling
coils, will it be possible to do away with the "bucking coil"
circuits?
(A) Should be able to do away with the bucking coil
circuits.
(Q) In this case should the disc circuits lead DIRECTLY to
ground in balanced relationship?
(A) Directly to ground in balanced relationship.
(Q) Will it be necessary or proper to use condensers across
the "bucking" coils if the balls are used across them, - that
is, should BOTH balls and condensers be used?
(A) If bucking coils are done away with, it's not necessary
to use them.
(Q) Are the function of these balls similar to those of a
spark gap in the old so-called "static machines"?
(A) Yes.
(Q) Should the balls, therefore, be confined to the antenna
end and the bucking coils and condensers to the output or
receiver end?
(A) As we find, the bucking coils may be dispensed with if
passed across as has been indicated. These will merely need
some tests with same, see?
(Q) Any other information at this time regarding this?
(A) This is what we have at present.
We are through for the present.
Copy to Self - Special
Copy to Ass'n file
BACKGROUND
See
1497-12.
REPORTS
7/09/39 He requested a fourth Physical Reading for his little
daughter, [
1490].
3/19/40 He wired for emergency Physical Reading for wife
[
1498]'s sister's husband, Mr. [
2151].
6/24/41 Mr. [
1861] obtained a reading regarding a static
eliminator - See
1861-8.



Edgar Cayce Readings © 1971, 1993, 1994, 1995 by the Edgar Cayce Foundation