(Q) What size and thickness would anodes be?
(A) As given, of the silver or nickel wire, made in form
of hairpin loop, that would extend into the container with
solution ends of same through cork or cork and rubber, and
the wire from the battery attached to one side and the other
that attaches to the body on the other side. In attaching
the solutions in the vibrations for the body, the greater
portions of same we find should be attached to central
portion of body. The plate, or the anode that would be
attached to the body here should be at least one and a half
to one and three-quarter inches (1 & 1/2 to 1 & 3/4") in
diameter, of circular nature, and the wire or attachment to
battery must enter or come to central portion of such a
plate, with those connections that will make same attach to
the body or hold in place by long tapes that would be tied
from either side of plate, see? The positive or the smaller
plate would be about the size of the twenty five cent or five
cent piece, and attached to the center of same. This may be
made, preferably, of German Silver, see? The plates that
attach to central portion would be of nickel or of German
Silver, see? thin, sufficient weight to give the perfect
connection with the body, see? for this is to cover an area
where the double circuit, as it were, of vibration in figure
eight comes to body, see? for as is seen in all bodies, when
in the embryo state, all vibration enters from the central
portion of body. Hence the attaching to these same ends,
just above and to the left of umbilicus, gives that central
vibration to the body when applying any of those vibrations
necessary for building or reduction in conditions in system.
That is, when attached for those conditions that use any
solution in body, attach to central portion of body. Hence
the positive may be made of one nature, the negative may be
made in such manner that the changes may be made for a direct
or plain battery, another for the combination that carries
the larger plate and the anodes that would connect with the
solutions. We find solutions of any nature last so long as
the vibration from same is active in a metal decomposition,
or in the active forces of alcohol dividing or separating
solution. Hence a solution of two ounces of any as has been
given, should give off correct vibrations for at least
fifteen to twenty-one days, see? Then change solution. Also
there are certain solutions that we will find it will be
necessary to cleanse the loop or wire, or anode, that
connects the solution to the negative wire or attachment for
body, see? Such we will find in Tincture of Iron, also in
Gold Chloride, also in Silver Nitrate, also in Spirits of
Camphor, also in other solutions of similar nature. Make as
given. These should be sufficient for all instructions to
make the perfect battery.
We are through for the present.
BACKGROUND
See
1800-8 on
9/24/25 A.M.
REPORTS
9/27/25 He wrote: "Have read and reread the readings and
everything is very clear to me, and I can now make up
batteries as soon as I can get a rubber mold made up." [He
submitted questions as to type of appliance suggested in
538-12. See
1800-10 on
9/29/25.]



Edgar Cayce Readings © 1971, 1993, 1994, 1995 by the Edgar Cayce Foundation