(Q) In the static eliminator, if glass discs be placed
between each mica disc, would not static be better
eliminated?
(A) Provided discs are entirely circular, and each
connection in figure should be connected with a circle coil.
That is, as the figure eight is in position and with
adjustments they are drawn together or pushed apart by each
adjustment, as set at present. Eliminates static in and to a
certain degree when set in properly. These coils, they would
be the adjusting for high or low, or the change as produces
the vibration called static.
(Q) Why does not the attached static eliminator work?
(A) Work when adjusted properly and set in correct position
in present form.
(Q) Is eliminator prepared according to readings given
before?
(A) Very good, as we have given. The change, as we have
given, with disc and with coil, would only change the
magnifying of the static variation as shown in receiving set,
and the position would make or show the change. This may be
effected by preparing the platform or position in present
machine for receiving or installation of same in proper form.
(Q) Is there any special kind of Mica which could be
procured that would not split readily?
(A) That as is used very good. There is a compound that
takes the place of Mica, which acts in the same form or
manner, or that produced by the compound of Nitre, Guncotton
and Camphor.
BACKGROUND
See
2492-3.
Subject of 2492-4 - "Radio static eliminating device #5."
REPORTS
7/03/24 See
2492-5.



Edgar Cayce Readings © 1971, 1993, 1994, 1995 by the Edgar Cayce Foundation