EC: Yes, we have these here. We find we have had part of
these before. Not the same receiving sets as we have had
before in whole. This receiving set, and the eliminators,
as yet have not been completed in the manner that would
produce the best results. We find the vibrations as are
accorded through the one giving the acoustics in their
proper form and order, and very good, yet not completed
in whole as given. The static reducers as is given through
the colored discs that should and would reduce the vibration
in static force and heat have not been completed. The filmet
[filament] for the static eliminator can be produced better
in the vacuum, as would be necessary for the reduction
entirely to be made from filmet [filament] wire and the
discs from the formation that will withstand the heat and
vibration, or that as is found in solid sheets of mica,
which may be colored to the required density by pigment
color, for the vibration is necessary in color to reduce
the vibration in heat and sudden atmospheric change that
takes place in the universal vibration, of which radio
receiving sets are a part. As has been given, the connection
to the receiving set should come between the vibration as is
given in battery finder and that called the detector tube
wire, that the amplified vibration may not partake of the
vibration in static forces, or in color and heat force,
called vibration or static vibration. The addition of tube
only makes the vibration the less, as we would find in added
tubes, either of the colored discs or of the vibration as is
brought to proper acoustics through the eight, or of the
discs. This mode as given for the receiving sets as
contrived at present is correct, and when followed along
these lines and principle will give the best vibration found
in the present operation of radio receiving sets. So follow
in that outlined, as given, would we bring the best vibration
to the present year receiving sets.
(Q) Does length of wires connecting eliminator to set
increase or lessen the efficiency?
(A) Depending upon the position or condition in which
connections are made, so that circle vibration the length
amplifies or increases the efficiency.
(Q) Will eliminator or series of eliminators so constructed
entirely eliminate static?
(A) As has been given. The more series of these so
constructed acts in the same manner as detector or amplifier
tubes operate in present receiving sets.
(Q) Of what thickness should the mica discs be?
(A) That sufficient that they may be made a part of the
amplifier, or of the reducing of vibration in color. So
it's solid. These may be rimmed, or left as in this, or
glass may be used in the same. This vibration is taken in
the discs and in the color, pigment color.
(Q) Could the discs be cemented to wire with de Khotinsky's
cement?
(A) Any that withstands heat.
BACKGROUND
See
2492-9.
Subject of 2492-10 - "Static Eliminator #11."
REPORTS
4/12/26 [
195]'s letter: "...You will recall the radio device
we were working on - a static eliminator and of which you
wrote - never was a success but if you read the various
copies of the dope we got you will note that reference is
made to the receiving sets then in use. Since that time the
sets have been improved and wired differently and I think it
improbable that the device as planned by us could be made
commercially but I do think there is a possibility of getting
better receptivity by a new way of wiring and this could be
worked out by you together with some radio engineer."
4/15/26 EC's reply: "...Regarding the static eliminator,
the machine that we have is one of those new wirings. That
is why that I thought if you had no objections to our trying
out the first contraption that you started to work on there,
that we might be able to get further readings with that on
this machine and see if we couldn't work out something, but
we'll get these up together I guess and see if we can't
get some fellow to make it up for us; but we are very much
handicapped, of course, being so far away from any work shop
...but I suppose we'll be able to locate something of that
kind in Norfolk..."
12/20/33 See
440-6, Par. 18-A--25-A re perfecting of radio
static eliminator.
12/21/33 See
440-7, Par. 3-A--20-A re perfecting of radio
static eliminator.
6/05/38 See
1497-5, Par. 20-A and 43-A in re static
suppressing device which information apparently refers back
to the [
2492] series of readings.
6/22/38 See
1497-6, entire reading devoted to perfecting of
a radio static eliminator device.
7/25/38 See
1497-7, Ditto.
10/14/38 See
1497-9, Ditto.
2/27/39 See
1497-12, Ditto.
3/09/39 See
1497-14, Ditto.
6/24/41 See
1861-8 re perfecting of radio static eliminator.



Edgar Cayce Readings © 1971, 1993, 1994, 1995 by the Edgar Cayce Foundation